Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

           

123 Street Avenue, City Town, 99999

(123) 555-6789

email@address.com

 

You can set your address, phone number, email and site description in the settings tab.
Link to read me page with more information.

CONTROL ARMS

control arms 3.png


PORSCHE UPDATED CONTROL ARMS


A very important part of your Porsche 996 suspension system is the control arms. The control arms manage the motion of the wheels in relation to your vehicle's body. A worn or bad control arm will cause too much movement and make for an uncomfortable drive, not to mention the wear and tear that worn out control arms cause to the rest of your Porsche’s suspension system and tires. At EPS our team of technicians has developed replacement upgrades for your Porsche Control Arms. The original wishbone style control arms (A & C) from Porsche were equipped with rubber bushings that deteriorate prematurely and fail. EPS has replaced this failure prone bushing with a stronger, solid polyurethane bushing with a metal protective socket. On the lower ball joint style control arms (B & D) EPS has taken the original Porsche control arm and threaded out the end to receive a heavy duty ball joint that can be easily replaced when worn. These upgrades will not only resolve your current clunking and rattling suspension noise, but will also save you time and money from replacing your control arms again. End the Squeal! Order yours today.


At EPS our team of technicians have developed a solution for the Porsche Boxster and 996 rear suspension, notorious for being noisy and clanky when worn.
 

  • A very important part of your Porsche suspension system is the trailing control arm. The control arms manage the motion of the wheels in relation to your vehicle's body. A worn or bad trailing control arm will cause excessive movement and make for a noisy and clanking suspension. Worn trailing control arm bushings also causes wear and tear to the rest of your Porsche’s suspension system and tires.
     
  • The original wishbone style trailing control arms from Porsche were equipped with a ball and socket. After time wear causes a clearance between the ball and the socket. This clearance causes a noisy clank in the suspension. EPS has replaced this failure prone ball and socket with a stronger, solid polyurethane bushing with a metal protective socket. Porsche Upgraded Lower Control Arm Fits Rear Left And Right Boxster, Boxster S And Cayman From 1997 to 2013 Models



PRODUCT WARRANTY: EPS warrants its products to be free from defects in material and workmanship for 12 months (unlimited miles) from the date of purchase. The policy covers all products supplied by EPS and applies to products sold and installed on vehicles registered and operated in the US and Canada.